Luminescent Au(III)-M(I) (M = Cu, Ag) Aggregates Based on Dicyclometalated Bis(alkynyl) Gold Anions†.

The syntheses and structures of a series of complexes based on the C∧C-chelated Au(III) unit (C∧C = 4,4'-bis(t-butyl) 2,2'-biphenyl-1,1'-diyl) are reported, namely, [{(C∧C)Au(C≡CtBu)2}2M2], (C∧C)Au(C≡CR)(C≡NXyl), and [{(C∧C)Au(C≡CR)2}{M(C≡NXyl)}] (M = Ag, Cu; R = tBu, C6H4tBu-4, C6H4OMe-4; Xyl = 3,5-Me2C6H3). The X-ray structures reveal a broad range of dispositions determined by the different coordination modes of Ag(I) or Cu(I). The complexes are bright photoemitters in the solid state and in poly(methyl methacrylate) (PMMA) films. The photoluminescence is dominated by 3IL(C∧C) transitions, with indirect effects from the rest of the molecules, as supported by theoretical calculations. This work opens up the possibility of accessing Au(III) carbon-rich anions to construct photoluminescent aggregates.

Multivariate Analysis Identifying [Cu(N

White light-emitting electrochemical cells (LECs) comprising only [Cu(N^N)(P^P)]+ have not been reported yet, as all the attempts toward blue-emitting complexes failed. Multivariate analysis, based on prior-art [Cu(N^N)(P^P)]+ -based thin-film lighting (>90 papers) and refined with computational calculations, identifies the best blue-emitting [Cu(N^N)(P^P)]+ design for LECs, that is, N^N: 2-(4-(tert-butyl)phenyl)-6-(3,5-dimethyl-1H-pyrazol-1-yl)pyridine and P^P: 4,5-bis(diphenylphosphino)-9,9-dimethylxanthene, to achieve predicted thin-film emission at 490 nm and device performance of 3.8 cd A-1 @170 cd m-2 . Validation comes from synthesis, X-ray structure, thin-film spectroscopic/microscopy/electrochemical characterization, and device optimization, realizing the first [Cu(N^N)(P^P)]+ -based blue-LEC with 3.6 cd A-1 @180 cd m-2 . This represents a record performance compared to the state-of-the-art tricoordinate Cu(I)-complexes blue-LECs (0.17 cd A-1 @20 cd m-2 ). Versatility is confirmed with the synthesis of the analogous complex with 2-(4-(tert-butyl)phenyl)-6-(3,5-dimethyl-1H-pyrazol-1-yl)pyrazine (N^N), showing a close prediction/experiment match: λ = 590/580 nm; efficiency = 0.55/0.60 cd A-1 @30 cd m-2 . Finally, experimental design is applied to fabricate the best white multicomponent host:guest LEC, reducing the number of trial-error attempts toward the first white all-[Cu(N^N)(P^P)]+ -LECs with 0.6 cd A-1 @30 cd m-2 . This corresponds to approximately ten-fold enhancement compared to previous LECs (<0.05 cd A-1 @<12 cd m-2 ). Hence, this work sets in the first multivariate approach to design emitters/active layers, accomplishing first-class [Cu(N^N)(P^P)]+ -based blue/white LECs that were previously elusive.

Transparent and flexible high-power supercapacitors based on carbon nanotube fibre aerogels.

In this work, we report the fabrication of continuous transparent and flexible supercapacitors by depositing a CNT network onto a polymer electrolyte membrane directly from an aerogel of ultra-long CNTs produced floating in the gas phase. The supercapacitors show a combination of a power density of 1370 kW kg-1 at high transmittance (ca. 70%), and high electrochemical stability during extended cycling (>94% capacitance retention over 20 000 cycles) and against repeated 180° flexural deformation. They represent a significant enhancement of 1-3 orders of magnitude compared to prior state-of-the-art transparent supercapacitors based on graphene, CNTs, and rGO. These features mainly arise from the exceptionally long length of CNTs, which makes the material behave as a bulk conductor instead of an aspect ratio-limited percolating network, even for electrodes with >90% transparency. The electrical and capacitive figures-of-merit for the transparent conductor are FoMe = 2.7, and FoMc = 0.46 F S-1 cm-2 respectively.

White-emitting Protein-Metal Nanocluster Phosphors for Highly Performing Biohybrid Light-Emitting Diodes.

This work presents a simple in situ synthesis and stabilization of fluorescent gold nanoclusters (AuNCs) with different sizes using engineered protein scaffolds in water. The protein-AuNC hybrids show a dual emission (450 and 700 nm) with a record photoluminescence quantum yield of 20%. These features impelled us to apply them to biohybrid light-emitting diodes as color down-converting filters or biophosphors. Efficient white emission (x/y CIE color coordinates of 0.31/0.29) and stabilities of more than 800 h were achieved. This represents a 2 orders of magnitude enhancement compared to the prior art. Besides the outstanding performance, the protein scaffold also infers a unique anisotropic emission character that is considered as a proof-of-concept of high interest for single-point lighting and display.

Polypyridyl ligands as a versatile platform for solid-state light-emitting devices.

The replacement of inorganic semiconductors with molecule-based compounds for applications in current-to-light conversion has led to a significant increase in interdisciplinary collaborations worldwide, affording new improved organic-light emitting diodes (OLEDs) ripe for commercial applications, as well as light-emitting electrochemical cells (LECs) that have recently started to head to the market. This review highlights the role that transition metal coordination complexes (TMCs) have played in advancing the field of molecular electronics, from early conception to the advanced development of several polypyridyl complexes currently pursued for both OLED and LEC concepts. In this context, the design and synthesis of Ir(iii), Pt(ii), Cu(i) and Ag(i) complexes as the emissive components of OLEDs and LECs are thoughtfully presented. We discuss how molecular design is pivotal for fine-tuning color and optimizing power efficiencies, highlighting the key roles of the metal, cyclometalate, and ancillary polypyridyl ligands. We provide insight into the strategies exploited for the development of new, improved emitters and their fabrication into OLEDs/LECs with high external quantum efficiencies and stabilities. In addition, we have surveyed the remarkable photophysical properties of third generation TMCs capable of undergoing thermally activated delayed fluorescence (TADF). Since previous reviews of TADF materials are strongly biased towards organic-based systems, this overview compliments other synopses of light emitting TADF materials. Finally, we shed light onto the conceptual challenges that still need to be overcome to advance the rational design of TMC-based TADF emitters with tunable ligands and the subsequent fabrication of OLEDs/LECs, which are tailor-made for each specific application.

Synthesis and Photophysical Properties of Au(III)-Ag(I) Aggregates.

Cyclometalated gold(III) complexes of the type (C∧N∧C)AuX [HC∧N∧CH = 2,6-bis(4-ButC6H4)pyrazine; 2,6-bis(4-ButC6H4)pyridine, or 2,6-bis(4-ButC6H4)4-Butpyridine; X = CN, CH(COMe)2, or CH(CN)2] have been used as building blocks for the construction of the first family of AuIII/AgI aggregates. The crystal structures of these aggregates reveal the formation of complex architectures in which the Ag+ cations are stabilized by the basic centers present on each of the Au precursors. The photophysical properties of these aggregates are reported. Compared to mononuclear pincer complexes, a general red-shift and an increase in the emission intensity are observed. In agreement with DFT calculations, the lowest energy absorption and the emission are assigned to 1IL(C∧N∧C) and 3IL(C∧N∧C) transitions dominated by the HOMO and the LUMO orbitals.

Isocyanide insertion into Au-H bonds: first gold iminoformyl complexes.

Isocyanides insert into gold(iii)-hydrogen bonds to give the first examples of gold iminoformyl complexes. The reaction is initiated by catalytic amounts of radicals; DFT calculations indicate that this is an equilibrium reaction driven forward by isocyanide in sufficient excess to trap the Au(ii) intermediate.

Acridine-decorated cyclometallated gold(iii) complexes: synthesis and anti-tumour investigations.

(C^N) and (C^N^C) cyclometalated Au(iii) represent a highly promising class of potential anticancer agents. We report here the synthesis of seven new cyclometalated Au(iii) complexes with five of them bearing an acridine moiety attached via (N^O) or (N^N) chelates, acyclic amino carbenes (AAC) and N-heterocyclic carbenes (NHC). The antiproliferative properties of the different complexes were evaluated in vitro on a panel of cancer cells including leukaemia, lung and breast cancer cells. We observed a trend between the cytotoxicity and the intracellular gold uptake of some representative compounds of the series. Some of the acridine-decorated complexes were demonstrated to interact with ds-DNA using FRET-melting techniques.

Unlocking Structural Diversity in Gold(III) Hydrides: Unexpected Interplay of cis/ trans-Influence on Stability, Insertion Chemistry, and NMR Chemical Shifts.

The synthesis of new families of stable or at least spectroscopically observable gold(III) hydride complexes is reported, including anionic cis-hydrido chloride, hydrido aryl, and cis-dihydride complexes. Reactions between (C^C)AuCl(PR3) and LiHBEt3 afford the first examples of gold(III) phosphino hydrides (C^C)AuH(PR3) (R = Me, Ph, p-tolyl; C^C = 4,4'-di- tert-butylbiphenyl-2,2'-diyl). The X-ray structure of (C^C)AuH(PMe3) was determined. LiHBEt3 reacts with (C^C)AuCl(py) to give [(C^C)Au(H)Cl]-, whereas (C^C)AuH(PR3) undergoes phosphine displacement, generating the dihydride [(C^C)AuH2]-. Monohydrido complexes hydroaurate dimethylacetylene dicarboxylate to give Z-vinyls. (C^N^C)Au pincer complexes give the first examples of gold(III) bridging hydrides. Stability, reactivity and bonding characteristics of Au(III)-H complexes crucially depend on the interplay between cis and trans-influence. Remarkably, these new gold(III) hydrides extend the range of observed NMR hydride shifts from δ -8.5 to +7 ppm. Relativistic DFT calculations show that the origin of this wide chemical shift variability as a function of the ligands depends on the different ordering and energy gap between "shielding" Au(dπ)-based orbitals and "deshielding" σ(Au-H)-type MOs, which are mixed to some extent upon inclusion of spin-orbit (SO) coupling. The resulting 1H hydride shifts correlate linearly with the DFT optimized Au-H distances and Au-H bond covalency. The effect of cis ligands follows a nearly inverse ordering to that of trans ligands. This study appears to be the first systematic delineation of cis ligand influence on M-H NMR shifts and provides the experimental evidence for the dramatic change of the 1H hydride shifts, including the sign change, upon mutual cis and trans ligand alternation.

Reductive Elimination Leading to C-C Bond Formation in Gold(III) Complexes: A Mechanistic and Computational Study.

The factors affecting the rates of reductive C-C cross-coupling reactions in gold(III) aryls were studied by using complexes that allow easy access to a series of electronically modified aryl ligands, as well as to gold methyl and vinyl complexes, by using the pincer compounds [(C^N^C)AuR] (R=C6 F5 , CH=CMe2 , Me and p-C6 H4 X, where X=OMe, F, H, tBu, Cl, CF3 , or NO2 ) as starting materials (C^N^C=2,6-(4'-tBuC6 H3 )2 pyridine dianion). Protodeauration followed by addition of one equivalent SMe2 leads to the quantitative generation of the thioether complexes [(C^N-CH)AuR(SMe2 )]+ . Upon addition of a second SMe2 pyridine is displaced, which triggers the reductive aryl-R elimination. The rates for these cross-couplings increase in the sequence k(vinyl)>k(aryl)≫k(C6 F5 )>k(Me). Vinyl-aryl coupling is particularly fast, 1.15×10-3  L mol-1 s-1 at 221 K, whereas both C6 F5 and Me couplings encountered higher barriers for the C-C bond forming step. The use of P(p-tol)3 in place of SMe2 greatly accelerates the C-C couplings. Computational modelling shows that in the C^N-bonded compounds displacement of N by a donor L is required before the aryl ligands can adopt a conformation suitable for C-C bond formation, so that elimination takes place from a four-coordinate intermediate. The C-C bond formation is the rate-limiting step. In the non-chelating case, reductive C(sp2 )-C(sp2 ) elimination from three-coordinate ions [(Ar1 )(Ar2 )AuL]+ is almost barrier-free, particularly if L=phosphine.

Correction: Highly photoluminescent copper carbene complexes based on prompt rather than delayed fluorescence.

Correction for 'Highly photoluminescent copper carbene complexes based on prompt rather than delayed fluorescence' by Alexander S. Romanov et al., Chem. Commun., 2016, 52, 6379-6382.

(C

A series of cyclometallated gold(iii) complexes supported by pyrazine-based (C^Npz^C)-type pincer ligands were synthesized via two different pathways. Nucleophilic attack on the isocyanide complex [(C^Npz^C)Au(C[triple bond, length as m-dash]NC6H3Me2-2,6)]SbF6 (2) gave [(C^Npz^C)Au(ACC)]SbF6 complexes with aniline (4·SbF6), adamantylamine (5), glycine ethyl ester (6), alanine methyl ester (7), valine methyl ester (8), phenylglycine methyl ester (9) and methionine methyl ester (10) substituents (ACC = acyclic carbene). The pathway via isocyanide insertion into gold-amide bonds was also investigated; e.g. the reaction of xylyl isocyanide with (C^Npz^C)AuNHPh followed by protonation with HBF4·OEt2 gave the acyclic carbene complex 4·BF4. To the best of our knowledge compounds 6-10 represent the first examples of gold(iii) acyclic carbene complexes bearing amino acid functions. The compounds provide a versatile platform for the study of the anti-proliferative properties of gold(iii) complexes. Tests against human adenoma-type lung cancer cells identified 5, 6, 7 and 10 as particularly promising and demonstrate the synthetic flexibility of acyclic carbene complexes and the potential of that class of compounds for anticancer applications. Compared to cisplatin, amino ester-containing ACC complexes showed improved selectivity for MCF-7 breast cancer cells over that for healthy fibroblasts.

Gold(III) Alkyne Complexes: Bonding and Reaction Pathways.

The synthesis and characterization of hitherto hypothetical AuIII π-alkyne complexes is reported. Bonding and stability depend strongly on the trans effect and steric factors. Bonding characteristics shed light on the reasons for the very different stabilities between the classical alkyne complexes of PtII and their drastically more reactive AuIII congeners. Lack of back-bonding facilitates alkyne slippage, which is energetically less costly for gold than for platinum and explains the propensity of gold to facilitate C-C bond formation. Cycloaddition followed by aryl migration and reductive deprotonation is presented as a new reaction sequence in gold chemistry.

Cytotoxicity of Pyrazine-Based Cyclometalated (C

The synthesis of a series of cyclometalated gold(III) complexes supported by pyrazine-based (C^N^C)-type pincer ligands is reported, including the crystal structure of a cationic example. The compounds provide a new platform for the study of antiproliferative properties of gold(III) complexes. Seven complexes were tested: the neutral series (C^Npz^C)AuX [X = Cl (1), 6-thioguanine (4), C≡CPh (5), SPh (6)] and an ionic series that included the N-methyl complex [(C^NpzMe^C)AuCl]BF4 (7) and the N-heterocyclic carbene complexes [(C^Npz^C)AuL]+ with L = 1,3-dimethylbenzimidazol-2-ylidene (2) or 1,3,7,9-tetramethylxanthin-8-ylidene (3). Tests against human leukemia cells identified 1, 2, 3, and 4 as particularly promising, whereas protecting the noncoordinated N atom on the pyrazine ring by methylation (as in 7) reduced the cytotoxicity. Complex 2 proved to be the most effective of the entire series against the HL60 leukemia, MCF-7 breast cancer, and A549 lung cancer cell lines, with IC50 values down to submicromolar levels, associated with a lower toxicity toward healthy human lung fibroblast cells. The benzimidazolylidene complex 2 accumulated more effectively in human lung cancer cells than its caffeine-based analogue 3 and the gold(III) chloride 1. Compound 2 proved to be unaffected by glutathione under physiological conditions for periods of up to 6 days and stabilizes the DNA G-quadruplex and i-motif structures; the latter is the first such report for gold compounds. We also show the first evidence of inhibition of MDM2-p53 protein-protein interactions by a gold-based compound and identified the binding mode of the compound with MDM2 using saturation transfer difference NMR spectroscopy combined with docking calculations.

Formation of Gold(III) Alkyls from Gold Alkoxide Complexes.

The gold(III) methoxide complex (C∧N∧C)AuOMe (1) reacts with tris(p-tolyl)phosphine in benzene at room temperature under O abstraction to give the methylgold product (C∧N∧C)AuMe (2) together with O=P(p-tol)3 ((C∧N∧C) = [2,6-(C6H3t Bu-4)2pyridine]2-). Calculations show that this reaction is energetically favorable (ΔG = -32.3 kcal mol-1). The side products in this reaction, the Au(II) complex [Au(C∧N∧C)]2 (3) and the phosphorane (p-tol)3P(OMe)2, suggest that at least two reaction pathways may operate, including one involving (C∧N∧C)Au• radicals. Attempts to model the reaction by DFT methods showed that PPh3 can approach 1 to give a near-linear Au-O-P arrangement, without phosphine coordination to gold. The analogous reaction of (C∧N∧C)AuOEt, on the other hand, gives exclusively a mixture of 3 and (p-tol)3P(OEt)2. Whereas the reaction of (C∧N∧C)AuOR (R = But, p-C6H4F) with P(p-tol)3 proceeds over a period of hours, compounds with R = CH2CF3, CH(CF3)2 react almost instantaneously, to give 3 and O=P(p-tol)3. In chlorinated solvents, treatment of the alkoxides (C∧N∧C)AuOR with phosphines generates [(C∧N∧C)Au(PR3)]Cl, via Cl abstraction from the solvent. Attempts to extend the synthesis of gold(III) alkoxides to allyl alcohols were unsuccessful; the reaction of (C∧N∧C)AuOH with an excess of CH2=CHCH2OH in toluene led instead to allyl alcohol isomerization to give a mixture of gold alkyls, (C∧N∧C)AuR' (R' = -CH2CH2CHO (10), -CH2CH(CH2OH)OCH2CH=CH2 (11)), while 2-methallyl alcohol affords R' = CH2CH(Me)CHO (12). The crystal structure of 11 was determined. The formation of Au-C instead of the expected Au-O products is in line with the trend in metal-ligand bond dissociation energies for Au(III): M-H > M-C > M-O.

Luminescent Gold(III) Thiolates: Supramolecular Interactions Trigger and Control Switchable Photoemissions from Bimolecular Excited States.

A new family of cyclometallated gold(III) thiolato complexes based on pyrazine-centred pincer ligands has been prepared, (C^Npz ^C)AuSR, where C^Npz ^C=2,6-bis(4-But C6 H4 )pyrazine dianion and R=Ph (1), C6 H4 tBu-4 (2), 2-pyridyl (3), 1-naphthyl (1-Np, 4), 2-Np (5), quinolinyl (Quin, 6), 4-methylcoumarinyl (Coum, 7) and 1-adamantyl (8). The complexes were isolated as yellow to red solids in high yields using mild synthetic conditions. The single-crystal X-ray structures revealed that the colour of the deep-red solids is associated with the formation of a particular type of short (3.2-3.3 Å) intermolecular pyrazine⋅⋅⋅pyrazine π-interactions. In some cases, yellow and red crystal polymorphs were formed; only the latter were emissive at room temperature. Combined NMR and UV/Vis techniques showed that the supramolecular π-stacking interactions persist in solution and give rise to intense deep-red photoluminescence. Monomeric molecules show vibronically structured green emissions at low temperature, assigned to ligand-based 3 IL(C^N^C) triplet emissions. By contrast, the unstructured red emissions correlate mainly with a 3 LLCT(SR→{(C^Npz ^C)2 }) charge transfer transition from the thiolate ligand to the π⋅⋅⋅π dimerized pyrazine. Unusually, the π-interactions can be influenced by sample treatment in solution, such that the emissions can switch reversibly from red to green. To our knowledge this is the first report of aggregation-enhanced emission in gold(III) chemistry.

Stereo- and Regioselective Alkyne Hydrometallation with Gold(III) Hydrides.

The hydroauration of internal and terminal alkynes by gold(III) hydride complexes [(C^N^C)AuH] was found to be mediated by radicals and proceeds by an unexpected binuclear outer-sphere mechanism to cleanly form trans-insertion products. Radical precursors such as azobisisobutyronitrile lead to a drastic rate enhancement. DFT calculations support the proposed radical mechanism, with very low activation barriers, and rule out mononuclear mechanistic alternatives. These alkyne hydroaurations are highly regio- and stereospecific for the formation of Z-vinyl isomers, with Z/E ratios of >99:1 in most cases.

Highly photoluminescent copper carbene complexes based on prompt rather than delayed fluorescence.

Linear two-coordinate copper complexes of cyclic (alkyl)(amino)carbenes (CAAC)CuX (X = halide) show photoluminescence with solid-state quantum yields of up to 96%; in contrast to previously reported Cu photoemitters the emission is independent of temperature over the range T = 4-300 K and occurs very efficiently by prompt rather than delayed fluorescence, with lifetimes in the sub-nanosecond range.

Alkynyl bridged cyclometalated Ir2M2 clusters: impact of the heterometal in the photo- and electro-luminescence properties.

We report two unprecedent alkynyl bridging cyclometalated clusters [Ir2M2(ppy)4(µ-C[triple bond, length as m-dash]CC6H4-OMe3)4] where M is Ag (2) and Cu (3), which display distinctive luminescence properties. While 2 features a green phosphorescence/electroluminescence nature located at the ppy ligands ((3)LC), 3 shows an orange emission confined to the metals and alkynyl groups having a mixed (3)L'C/(3)L'MCT/(3)MMCT (L' = alkynyl) nature.

Gold(III)-CO and gold(III)-CO2 complexes and their role in the water-gas shift reaction.

The water-gas shift (WGS) reaction is an important process for the generation of hydrogen. Heterogeneous gold catalysts exhibit good WGS activity, but the nature of the active site, the oxidation state, and competing reaction mechanisms are very much matters of debate. Homogeneous gold WGS systems that could shed light on the mechanism are conspicuous by their absence: gold(I)-CO is inactive and gold(III)-CO complexes were unknown. We report the synthesis of the first example of an isolable CO complex of Au(III). Its reactivity demonstrates fundamental differences between the CO adducts of the neighboring d (8) ions Pt(II) and Au(III): whereas Pt(II)-CO is stable to moisture, Au(III)-CO compounds are extremely susceptible to nucleophilic attack and show WGS reactivity at low temperature. The key to understanding these dramatic differences is the donation/back-donation ratio of the M-CO bond: gold-CO shows substantially less back-bonding than Pt-CO, irrespective of closely similar ν(CO) frequencies. Key WGS intermediates include the gold-CO2 complex [(C^N^C)Au]2(µ-CO2), which reductively eliminates CO2. The species identified here are in accord with Au(III) as active species and a carboxylate WGS mechanism.